3D Printed Parts
STL files for 3D printing will need to be oriented for print using either FDM or SLS machines.
Parts were built with Translucent Clear PLA filament.
Original design source files may be downloaded using the links below.
Use Clear PLA Transparent White Filament to get the translucent effect
Slice with Settings for PLA material
The parts were sliced using CURA using the slice settings below.
- PLA filament 200c extruder
- 0.2 layer height
- 10% gyroid infill
- 60mm/s print speed
- 60c heated bed
Supports
- For the handle: Tree Supports
- For the Coil and End: Normal Supports
- Placement: Everywhere
- Support Overhang Angle: 70
- Support Destiny: 10%
- Enable Support Interface Off
- Support Z Distance: .21
- Brim: 6
Support Blockers
Use support blockers for the tops of the Coil and end parts. Allow the supports to attach the bottom overhangs to both parts.
Page last edited October 08, 2024
Text editor powered by tinymce.
