In this project we'll build the legendary Zelda Master Sword! This light up sword is motion activated, so you can shoot blasts with lights and sound effects. 

You can battle to hear random clash sounds or aim to blast enemies with ease! 

This Master Sword is fully 3D Printed! NeoPixel LED Strips and the Adafruit PropMaker Feather Wing animate colors and plays sound effects!

You can recharge the battery or even add new sounds with the USB port. The sword mounts on a computer, just like a USB Drive! 

Watch 3D Hangout for 1+hr of live demo, guide walkthrough and more!

Add new LED animations or program new motions to create custom actions. All the code and libraries live right on the device, so no need to install any programs to edit your code!

The PropMaker and Feather M4 Express make it easy to add more buttons, sensors or even a 3 watt LED!

The sword prints in parts and is adhered together. Components are installed in the handle, LED strips line the middle of the blade to create a beautifully diffused blade!

Designed by Garrett Kearney of CHAOS CORE TECH, its open to edit!

We modified the blade to allow it to swing easier and to cut down to the length of the LEDs.

We even made a smaller blade for children! 

Parts

Angled shot of a Adafruit Feather M4 Express.
It's what you've been waiting for, the Feather M4 Express featuring ATSAMD51. This Feather is fast like a swift, smart like an owl, strong like a ox-bird (it's half ox,...
$22.95
In Stock
Angled shot of a Assembled Adafruit Prop-Maker FeatherWing.
The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. Perfect for fitting into your next prop build! This FeatherWing will...
$10.95
In Stock
Adafruit NeoPixel Digital RGB LED Strip with all the LEDs lighting in a rainbow pattern.
So thin. So mini. So teeeeeeny-tiny. It's the 'skinny' version of our classic NeoPixel strips!These NeoPixel strips have 60 digitally-addressable pixel Mini LEDs per...
$99.80
In Stock
Lithium Ion Cylindrical Battery - 3.7v 2200mAh with JST PH connector
Need a big battery for your project? This lithium-ion battery contains a 2200mAh and a protection circuit that provides over-voltage, under-voltage, and over-current protection. Yet,...
$9.95
In Stock
Mini Oval Speaker with pico blade connector
Hear the good news! This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. We particularly like...
Out of Stock
angled shot of single white 6mm tactile switch button.
Slim clicky momentary switches are standard input "buttons" on electronic projects. These are half the width of classic 6mm tactile switches so they line up better on a...
$4.95
In Stock
Angled shot of an assembled USB DIY Connector with MicroB Female Plug. The female pluf faces the camera angle.
As an addition to our other USB DIY shells, we have a 'micro B female' in a panel-mount-like connector. This isn't true panel mount but you could glue the black plastic...
$0.95
In Stock
Angled shot of an assembled USB DIY Slim Connector Shell with a MicroB Plug. The male plug faces the camera at an angle.
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY MicroB Male connector. It's a...
$0.95
In Stock
10 wire Silicone Cover Stranded-Core Ribbon Cable
For those who are fans of our silicone-covered wires, but are always looking to up their wiring game. We now have Silicone Cover Ribbon cables! These may look...
$3.95
In Stock
Angled shot of STEMMA JST PH 3-Pin to Male Header Cable - 200mm.
This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. We're carrying these to match up with our...
$1.25
In Stock

This guide was first published on Jul 30, 2019. It was last updated on Mar 18, 2024.

This page (Overview) was last updated on Mar 08, 2024.

Text editor powered by tinymce.