It's never a bad time to make a NeoPixel project, but the holiday season certainly does lend itself to creating large-scale, blinky, colorful displays. In this project, we're taking the classic Christmas tree shape, cutting it out of wood and mounting some NeoPixels in the tree to create a festive yuletide light display.
The whole thing is controlled by a Circuit Playground Bluefruit board, which sits proudly on top of the tree in a 3D printed star with all ten of its NeoPixels shining brightly and swirling along with the additional pixels on the tree.
Electronics
Circuit Playground Bluefruit is our third board in the Circuit Playground series, another step towards a perfect introduction to electronics and programming. We've...
$24.95
In Stock
These are the smallest NeoPixel breakouts around! Tiny, bright RGB pixels to your project. These little PCBs are only 8mm x 10mm and have two sets of three pads on the back for...
$4.95
In Stock
Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire...
Out of Stock
3D Printing
Having a 3D printer without filament is sort of like having a regular printer without paper or ink. And while a lot of printers come with some filament there's a good chance...
Out of Stock
Other Supplies and Tools
Don't feel confined by these supplies though for the tree body and NeoPixel mounting options. You could use fabric, cardboard, foam, etc. to create your own tree shape.
