You can insert the wireless LEDs into pieces of clear heat shrink to make sure that they are protected while you're shaking them around. This way they're kept safe but their light is still fully visible.

Grab one wireless LED and a tube of clear heat shrink.

Slide the wireless LED into the tube of heat shrink. Make sure that the LED is against the side of the tube and the coil is facing the opening of the heat shrink.

Carefully snip the heat shrink next to the LED.

Repeat this process for the rest of your wireless LEDs.

This guide was first published on May 18, 2022. It was last updated on May 18, 2022.

This page (Protect the LEDs) was last updated on May 17, 2022.

Text editor powered by tinymce.

Search