The top lid of the 3D printed case is sized to attach the touch screen to it.

On the back of the touch screen, place a mounting sticker in each corner. If you do not have mounting stickers, you can use pieces of looped tape.

Carefully run the touch screen's ribbon cable through the slot on the top lid. Then, attach the touch screen to the top lid with the mounting stickers.

This guide was first published on Apr 05, 2022. It was last updated on 2022-04-05 18:55:00 -0400.

This page (Mount the Touch Screen) was last updated on Apr 05, 2022.

Text editor powered by tinymce.