Solder the ESP32-S2 and Lipoly Charger BFF

Solder the short end of the headers to the LiPo BFF.

Place the QT Py ESP32-S2 onto the headers on the LiPo BFF. Make sure that the pins are matched. The QT Py's USB port should be on the other side of the LiPo BFF's LiPo port. 

Solder the QT Py to the headers.

Your QT Py ESP32-S2 is ready to be battery-powered!

This guide was first published on Apr 05, 2022. It was last updated on Apr 05, 2022.

This page (Assembly) was last updated on Apr 04, 2022.

Text editor powered by tinymce.