Slice Settings
Depending on your 3D printer, you may need to adjust the slice settings. We tested the enclosure on a Sigma BCN3D, Deltaprintr Go and a Printrbot Play. They do not require any support material and are oriented to print "as is".
- Nozzle: 0.4mm
- Extrusion Multiplier: 1.0
- Extrusion Width: 0.48mm
- Layer Height: 0.2mm
- Nozzle Temperature: 220c
Fusion 360 Design Archive
You can remix the design if you'd like to make any adjustments or reuse components.
Page last edited December 05, 2016
Text editor powered by tinymce.