Angled Shot of the Adafruit Pro Trinket - 3V 12MHz.
Deprecation Warning: The Pro Trinket bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still...
guides with product
$9.95
In Stock
Adafruit LiIon/LiPoly Backpack soldered onto a Pro Trinket, plugged into a solderless breadboard.
If you have an ItsyBitsy or Pro Trinket you probably know it's the perfect little size for a portable project. This LiPoly backpack makes it really easy to do! Instead of wiring 2...
guides with product
$4.95
In Stock
Adafruit HUZZAH CC3000 WiFi Breakout with Onboard Antenna
For years we've seen all sorts of microcontroller-friendly WiFi modules but none of them were really Adafruit-worthy. Either they were too slow, or too difficult to use, or...
guides with product
No Longer Stocked
Adafruit CC3000 WiFi Breakout with uFL Connector for Ext Antenna
For years we've seen all sorts of microcontroller-friendly WiFi modules but none of them were really Adafruit-worthy. Either they were too slow, or too difficult to use, or...
guides with product
No Longer Stocked
RP-SMA to uFL Adapter Cable
This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called uFL, IPEX, IPAX,...
$3.95
In Stock
Short 2.4GHz Dipole Swivel Antenna
This 4"/100mm long swivel dipole antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 2.4-2.5GHz wireless receiver/transmitter such...
$6.95
In Stock
Long 2.4GHz Dipole Swivel Antenna
This 8"/200mm long swivel dipole antenna has 5dBi of gain and 50Ω impedance so it will work fantastically with just about any 2.4-2.5GHz wireless receiver/transmitter such...
$8.95
In Stock
Lithium Ion Polymer Battery 3.7v 100mAh with JST 2-PH connector
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
Out of Stock
Angled shot of a Lithium Ion Polymer Battery 3.7V 500mAh with JST-PH connector.
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
$7.95
In Stock
Breadboard-friendly SPDT Slide Switch
These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in nicely into a solderless breadboard. They're easy to switch...
$0.95
In Stock
Single LED lit up bright blue
Need some really bright LEDs? We are big fans of these clear blue LEDs, in fact we use them exclusively in our kits. They are very bright and have about 20degree LED beam. They go...
$8.00
In Stock
Silicone Cover Stranded-Core Wire - 2m 30AWG Red
Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire...
$0.75
In Stock
Array of many colorful heatshrink tubes.
Heat shrink is the duct tape of electronics which I guess makes this heat shrink the colorful and exciting duct tape they sell at craft stores.  This heat shrink comes in six...
$4.95
In Stock
Atten 50-Watt Soldering Iron with US 3-prong power cord
Discontinued - you can grab Adjustable 60W Pen-Style Soldering Iron - 120VAC USA Plug - BEST 102C or...
No Longer Stocked
Assembled PrintrBot Simple Metal 3D Printer
New from Printrbot, the Metal Simple is a brand new rock solid, all metal, fully-assembled Printrbot Simple! As opposed to the Printrbot...
No Longer Stocked
Stop motion of person popping a print off flexible plate for Printrbot.
Removing 3D printed parts from your 3D printer can be tough. Sometimes pieces get stuck to your 3D printing plate and their bottoms get stuck to your build plate.  Over time,...
No Longer Stocked
Stop motion of person popping a print off flexible plate
Removing 3D printed parts can be tough. Sometimes pieces get stuck to your 3D printing plate and their bottoms get stuck to your build plate.  Over time, chiseling objects off can...
No Longer Stocked
Filament for 3D printers in various colors and types stacked together.
Having a 3D printer without filament is sort of like having a regular printer without paper or ink.  And while a lot of printers come with some filament there's a good chance...
Out of Stock