Adafruit NeoPixel Digital RGB LED Strip reel wired to a microcontroller, with all the LEDs in a rainbow
You thought it couldn't get better than our world-famous 32-LED-per-meter Digital LED strip but we will prove you wrong! These...
$84.75
In Stock
Adafruit NeoPixel Digital RGB LED Strip reel wired to a microcontroller, with all the LEDs in a rainbow
You thought it couldn't get better than our world-famous 32-LED-per-meter Digital LED strip but we will prove you wrong! These...
$84.75
In Stock
Adafruit NeoPixel Digital RGB LED Strip reel wired to a microcontroller, with all the LEDs in a rainbow
You thought it couldn't get better than our world-famous 32-LED-per-meter Digital LED strip but we will prove you wrong! You wanted...
$99.80
In Stock
Adafruit NeoPixel Digital RGB LED Strip reel wired to a microcontroller, with all the LEDs in a rainbow
You thought it couldn't get better than our world-famous 32-LED-per-meter Digital LED strip but we will prove you wrong! You wanted...
$99.80
In Stock
5V 10A switching power supply brick with IEC power port.
This is a beefy switching supply, for when you need a lot of power! It can supply 5V DC up to 10 Amps, running from 110V or 220V power (the plug it comes with is for US/Canada/Japan...
$29.95
In Stock
Angle shot Female DC Power adapter - 2.1mm jack to screw terminal block
If you need to connect a DC power wall wart to a board that doesn't have a DC jack - this adapter will come in very handy! There is a 2.1mm DC jack on one end, and a screw terminal...
$2.00
In Stock
4700uF 10v through hole  Electrolytic Capacitor
This Big Freaking Capacitor is just the trick when you have a lot of current sloshing around your project. They'll help smooth out voltage spikes by providing a little buffering....
$1.95
In Stock
Angled shot of a Adafruit METRO 328 Fully Assembled
We sure love the ATmega328 here at Adafruit, and we use them a lot for our own projects. The processor has plenty of GPIO, Analog inputs, hardware UART SPI and I2C,...
Out of Stock
Top view of Premium Female/Male 'Extension' Jumper Wires - 40 x 12 (300mm) folded and fanned out.
Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow...
$7.95
In Stock