You can get flexible and creative with the MONSTER M4SK when building your own costumes and props! Do you sometimes feel constrained by the typical human interocular distance? Who doesn't? No problem! Simply snap the two halves of the MONSTER M4SK off of the conveniently perforated bridge section and go bonkers!

By re-wiring the M4SK with our 9-pin JST connector cable, you'll be able to use the screens and all other features (with the exception of the capacitive touch boop nose) in a new, flexible, wider arrangement!

Parts

MONSTER M4SK DIY Electronic Face mask.  Two Screens Display Eyes that blink and dart up and down.
Peep dis! Have you always wanted to have another pair of eyes on the back of your head? Or outfit your costume with big beautiful orbs? The MONSTER M4SK
$44.95
In Stock
JST SH 9-Pin jumper Cable
This 9-pin cable is just about 100mm / 4" long and fitted with JST-SH female connectors on both ends. Compared with chunkier JST-PH these are 1mm pitch instead of 2mm,...
$1.95
In Stock
Convex Plastic Lens with Edge
The eyes have it! Add this little lens to make a big expression with our Spooky Eyes demo for microcontrollers or Raspberry Pi. These are plastic lenses, with brilliant clarity and a...
$3.95
In Stock
40mm Diameter Convex Glass Lens with Edge
The eyes have it! Add this little lens to make a big expression with our Spooky Eyes demo for microcontrollers or Raspberry Pi. These are gorgeous glass (not plastic/acrylic!)...
$5.95
In Stock
Lithium Ion Polymer Battery 3.7v 420mAh with JST 2-PH connector and short cable
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
$6.95
In Stock
Mini Oval Speaker with pico blade connector
Hear the good news! This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. We particularly like...
Out of Stock

Materials and Supplies

In addition to the parts listed above, you'll need the following:

  • A creature head/mask with wide set eyes, such as Frank the Fish featured here
  • Marker
  • Scissors or hobby knife
  • E6000 glue (also sold as Goop brand)
  • Velcro hook and loop fastener with adhesive backing (industrial strength is best)
  • Isopropyl alcohol for surface cleanup/prep

This guide was first published on Sep 12, 2019. It was last updated on Mar 08, 2024.

This page (Overview) was last updated on Mar 08, 2024.

Text editor powered by tinymce.