Required Hardware

Hardware for Networking (one or the other)

Optional Hardware for Wearables

To go wearable/portable, power the Raspberry Pi and Pixel board with two lipo batteries and two Adafruit PowerBoots and corresponding USB adaptors:

Note: The Pixel started off as a Kickstarter which is version 1 of the product.  Some version 1 Pixels were even in the Adafruit store.  The Pixel software used in this guide is compatible with both the version 1 and version 2 models.

Last updated on 2015-05-04 at 04.27.07 PM Published on 2015-01-03 at 11.18.25 PM