Look the part while you walk around town listening to your favorite mixes. CircuitPython powers this personal music player, with a stylish 3D printed case, TFT display, mech keyswitch controls and more.

Pop in a different "mix tape" SD card when you're in the mood for some different tunes.

Parts

Angle shot of Feather RP2040 prototype
A new chip means a new Feather, and the Raspberry Pi RP2040 is no exception. When we saw this chip we thought "this chip is going to be awesome when we give it the Feather...
$11.95
In Stock
2.0" TFT breakout wired up on breadboard, showing colorful image of friendly robot
This gorgeous IPS display breakout is the best way to add a small, colorful and bright display to any project, with excellent visibility from any angle. Since the display uses 4-wire...
$19.95
In Stock
Top view video of a fully assembled NeoKey 1x4 QT I2C with switches and smoke gray keycaps powered by a QT Py on a breadboard. A hand reaches down to press the keys, which emit rainbow colors.
The only thing better than a nice mechanical key is, perhaps, FOUR mechanical keys that also can glow any color of the rainbow - and that's what the Adafruit...
$9.95
In Stock
Angled shot of ten white Kailh key switches.
For crafting your very own custom keyboard, these Kailh White Linear mechanical key switches are deeee-luxe! With smooth actuation and Cherry MX...
$6.95
In Stock
Angled shot of five cyan keycaps.
Dress up your mechanical keys in your favorite colors with a wide selection of gumdrop-like, retro, curvy, and stylish MA profile keycaps. Here is a 5 pack of Cyan MA...
$4.95
In Stock
Top view video of a gloved hand turning the rotary encoder knobs on three PCBs. The NeoPixel LEDs on each PCB change color. The OLED display changes its readout data with each twisty-turn.
Rotary encoders are soooo much fun! Twist em this way, then twist them that way. Unlike potentiometers, they go all the way around and often have little detents for tactile feedback....
$5.95
In Stock
Double prototyping feather wing PCB with socket headers installed
This is the FeatherWing Doubler - a prototyping add-on and more for all Feather boards. This is similar to our
$7.50
In Stock
Lithium Ion Polymer Battery 3.7v 1200mAh with JST 2-PH connector
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
$9.95
In Stock
Angled shot of a Adafruit I2S 3W Class D Amplifier Breakout.
Listen to this good news - we now have an all in one digital audio amp breakout board that works incredibly well with the 
$5.95
In Stock
1 x Short Headers Kit for Feather
12-pin + 16-pin Female Headers
1 x Short Feather Male Headers
12-pin and 16-pin Male Header Set
1 x 100K Ohm Resistor
5% 1/4W - Pack of 25 - Through Hole
1 x SPDT Slide Switch
Breadboard-friendly
1 x Hook-up Wire Spool Set
22AWG Stranded-Core - 6 x 25ft
1 x USB Type A to Type C Cable
Approx. 1 meter / 3 ft long

This guide was first published on Sep 14, 2022. It was last updated on 2022-09-14 11:27:06 -0400.

This page (Overview) was last updated on Oct 04, 2022.

Text editor powered by tinymce.