80 GUIDES | 418 PAGES | 3 FEATURED | 0 POPULAR
Vintage radios can be beautiful, but many are beyond repair. Here's a guide to repurposing it as an eerie playback device that uses the original tuner dial, power knob, and speaker and grafts on a Feather ESP8266 Huzzah with Music Maker MP3 FeatherWing that can play creepy sound effects, and trigger a specific song when intrepid guests tune the dial to a specific frequency. Muhuwahahahahahaha!
Using 900Mhz (or 425Mhz) RF for long-range communications between the transmitter and the receivers, this general purpose controller will make your wireless triggering wishes come true! Plus, you get to use a rotary encoder knob to scroll menu sets, and punch in your commands on the lighted 4x4 Trellis keypad.
Here's a Soviet themed launch-code box, complete with missile switch covered toggles, a Feather with red 14-segment display for the countdown timer, and stress-inducing piezo buzzer. Use it for an escape room, prop, or wedding proposal. Your players, or potential spouse-to-be, will need to enter the correct five-switch sequence to defuse the device before all is lost. (Note: this project is a harmless prop, not an actual bomb.)
Build your own Overwatch Lucio Blaster! Use Arduino, NeoPixels, MP3 Music Maker, Audio FX board, and a 20 watt amplifier to drive the impressive blasting sound effects, lights, and music from this Overwatch prop gun! In part three, turn prototype circuit into a permanent one, 3D print and assemble the final gun.
Perfect for magic tricks, escape rooms, and slightly unorthodox birthday parties -- this seemingly innocuous, sealed deck of cards contains a secret. When the puzzle is solved, the deck is thrown in the air, tossed to a friend, or dropped a short distance. Freefall is detected by the Circuit Playground embedded within, and it beeps a secret Morse code message.
Here's a guide to quickly and easily adding exciting, colorful lighting effects to your props. Using the accelerometer, speaker, and NeoPixel LEDs built into the Circuit Playground, you can have sounds and lights for idle animations, along with two different effects triggered by waving and striking your foam sword, cosplay blaster, magic wand, and more.
Build a creepy, glowing test tube display... if you dare. A Feather microcontroller makes the UV LEDs shine to create dazzling effects in the fluorescent pigment-and-water filled test tubes. Easy-to-assemble black iron pipe forms the base of this labware set. The perfect prop for your own haunted house or creepy laboratory.