Now you're ready to use the power supply with a module. You'll plug in your module's power cable into the 2x5 header on the power supply.
There are also IDC connector adapters for gear that don't use standard power connections. This adapter converts Teenage Engineering Pocket Operator Modular 3-pin connectors to a Eurorack power connector.
Plug your IDC power cable into the power supply, making sure that the -12V lines are matched. There an embossed line on the 3D printed lid to help as a reminder for the -12V location.
Connect a 5V USB power supply to the USB C plug. The TPS65131 accepts 3 to 5.5V as an input voltage, so any 5V USB power supply will work. Switch on the power supply and you're ready to use your module.
Page last edited April 01, 2025
Text editor powered by tinymce.
