USB MIDI Hosts such as laptops, sample stations, grooveboxes, and Raspberry Pi-based music computers love talking to Class Compliant Devices such as MIDI keyboards and controllers, but not with each other. How sad :(
This simple project allows two USB MIDI Hosts to talk to each other, opening up a world of sequencing possibilities. Yay!
This project uses TWO Adafruit QT Py RP2040 boards connected via a short STEMMA QT cable. Be sure you get TWO boards and not just one.
What a cutie pie! Or is it... a QT Py? This diminutive dev board comes with one of our new favorite chip, the RP2040. It's been made famous in the new
guides with product
Out of Stock
This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead of 2mm, but...
Out of Stock
This cable is used to program the QT Py boards. Also if your MIDI devices have USB A connections, you'll need two cables like this to connect each MIDI host to the project.
As technology changes and adapts, so does Adafruit. This USB Type A to Type C cable will help you with the transition to USB C, even if you're still...
$4.95
In Stock
Page last edited February 26, 2025
Text editor powered by tinymce.
