Use
Display
The app shows a minimal UI on the display connected to the Fruit Jam DVI output. The second line of text from the top is the status line. It will update to show the current configuration and other information.
Beneath that, in larger yellow text, is the currently tuned frequency. Below that is an indicator bar that shows how strong the signal on the current frequency is. A more filled bar means stronger reception.
Below the signal strength bar are a few more lines that show audio and antenna configurations. The remaining block of text contains reminders of the onboard button and keyboard controls.
Onboard Button
Button 1, and button 2 on the Fruit Jam will move the tuner down and up respectively.
USB Keyboard
The up arrow and down arrow keys on the keyboard will move the tuner up and down.
The current band is shown in the status line which is the second line of text from the top of the screen.
On-board Buttons
Press and hold button 1 on the Fruit Jam to change between FM, AM, and weather bands. The long-press should last about one second, the band will change upon releasing the button.
USB Keyboard
Press the "B" key on the keyboard to change between FM, AM, and weather bands.
To get to your favorite stations faster, the app provides a list of preset stations for each band.
On-board Buttons
Press and hold button 3 on the Fruit Jam to go to the next preset station for the current band. The station will change when you release the button after holding it for about one second.
USB Keyboard
Press the "P" key on the USB keyboard to go to the next preset station in the list for the current band.
The preset lists are hard-coded near the top of am_fm_radio.py, you can change them in that file if you wish. You can also dynamically modify the presets using the UI without having to dive into the code.
On-board Buttons
Press and hold button 2 on the Fruit Jam to save or remove the current station as a preset. If the station isn't already a preset, it will be added to the list. If it was already in the list, it will be removed. The status line on the display will be updated to indicate which occurred. The action happens after you release button 2 from holding it for about one second.
USB Keyboard
The "S" key on the USB keyboard will save the current station as a preset. The "X" key will remove the current station from the preset list. In both cases the status line on the display will update to indicate what happened.
The app supports tuning directly to a specific frequency if you use a USB keyboard. Without the keyboard there is no way to do this, you can only seek up/down and through the presets.
USB Keyboard
To tune to a specific station press the "F" key on the USB keyboard, type a station frequency, then press enter. The radio will tune to the frequency you typed when you press enter. If you type a frequency that is outside the range of the current band, the band will be changed automatically to the one with the new frequency.
The radio app provides mute functionality in case you need to cut the audio to hear something going on around you.
Onboard Buttons
Press button 3 on the Fruit Jam to toggle mute on the radio's audio output. The status line will be updated to indicate when the audio is muted.
USB Keyboard
Press the "M" key on the USB keyboard to toggle mute on the radio's audio output. The status line will be updated to indicate when the audio is muted.
Page last edited October 09, 2026