The STL files are designed to work best on a Makerbot Replicator 2 and sliced with Makerware using PLA filament.
PLA @230
2 Shells
Infill %10
90/150 Speeds
1-2 Hours
Will it Print on a Printrbot or Reprap?
Yes! But the tolerance may be a bit different, cause the snap-fit parts not to fit properly. You can how ever make minor adjustments to the solids in 123D by modify our design.

This guide was first published on May 05, 2014. It was last updated on Mar 08, 2024.

This page (3D Printing) was last updated on May 02, 2014.

Text editor powered by tinymce.