Parts List
The STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print. Original design source files may be downloaded using the links below.
Slice with Settings for PLA Material
The parts were sliced using CURA with the slice settings below.
- PLA filament 200c extruder
- 0.25 layer height
- 10% gyroid infill
- 60mm/s print speed
- 60c heated bed
- Brim line count 6
Supports
- Support Overhang Angle: 50
- Support Destiny: 6%
- Enable Support Interface
- Enable Support Roof
- Support Z Distance: .21
Text editor powered by tinymce.
