# Zelda LED UltraHand
## Overview
https://youtu.be/DNyDilNJeho
You can build a prop replica of Link’s Ultra Hand from The Legend of Zelda, Tears of the Kingdom.
We were inspired by Link’s new ability and used LED noodles to make it into a glowing 3D printed prop.
It’s a two piece wearable prop that fits over your arm and the palm of your hand.
The arm band has 3 LED noodles wired in series that are powered by a 9V battery while the palm uses a single LED noodle with a coin cell.
The battery holders feature switches that are easy to get to for quickly turning the LEDs on and off.
The LED noodles are pretty bright compared to EL wire and it’s even visible during the day.
## Parts
### Part: Blue 3V LED Noodle
quantity: 4
nOOds - Flexible LED Filament - 3V 300mm long - Blue
[Blue 3V LED Noodle](https://www.adafruit.com/product/5508)
### Single CR2032 / 20mm Coin Cell Battery Holder with Switch
[Single CR2032 / 20mm Coin Cell Battery Holder with Switch](https://www.adafruit.com/product/4856)
This tiny coin cell battery holder is ideal for small portable or wearable projects. It holds one 20mm coin cell (also known as CR2032) in series to generate 3V nominal. 20mm coin cells are popular as they are used in keychain lights and remotes, so they are easy to get and fairly...
In Stock
[Buy Now](https://www.adafruit.com/product/4856)
[Related Guides to the Product](https://learn.adafruit.com/products/4856/guides)
### JST PH 2-Pin Cable - Female Connector 100mm
[JST PH 2-Pin Cable - Female Connector 100mm](https://www.adafruit.com/product/261)
Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly chargers!
[We have the socket 'mating' version of this cable](https://www.adafruit.com/product/3814) over here,
In Stock
[Buy Now](https://www.adafruit.com/product/261)
[Related Guides to the Product](https://learn.adafruit.com/products/261/guides)
### JST PH 2-Pin Cable – Male Header 200mm
[JST PH 2-Pin Cable – Male Header 200mm](https://www.adafruit.com/product/3814)
For a really long time we assumed that the JST PH didn't have a free-hanging male header version. But then we found this **JST-PH 2-pin Male Cable,** and we were like, _this is perfect!_ It's not a genuine JST connector, but it's 100%...
In Stock
[Buy Now](https://www.adafruit.com/product/3814)
[Related Guides to the Product](https://learn.adafruit.com/products/3814/guides)
### 9V battery holder with switch & 5.5mm/2.1mm plug
[9V battery holder with switch & 5.5mm/2.1mm plug](https://www.adafruit.com/product/67)
This is a 9V battery pack with on/off switch and a pre-attached 5.5mm/2.1mm center-positive barrel plug. Use this to battery-power your Arduino (or other electronic projects) - it's ready to go out of the box!
Battery & screw not included.
![]()
In Stock
[Buy Now](https://www.adafruit.com/product/67)
[Related Guides to the Product](https://learn.adafruit.com/products/67/guides)
### Alkaline 9V Battery
[Alkaline 9V Battery](https://www.adafruit.com/product/1321)
Battery power for your portable project! These batteries are high quality at a good price and work fantastic with any of the kits or projects in the shop that use 9V.
These batteries are Alkaline (MnO2) chemistry, with a voltage range of 9.6V (fresh) to 4.8V (dead). The mAh capacity...
Out of Stock
[Buy Now](https://www.adafruit.com/product/1321)
[Related Guides to the Product](https://learn.adafruit.com/products/1321/guides)
### CR2032 Lithium Coin Cell Battery
[CR2032 Lithium Coin Cell Battery](https://www.adafruit.com/product/654)
A perfect match for our [sew-able coin cell holder](http://www.adafruit.com/products/653). This non-rechargeable coin cell is CR2032 sized: 20mm diameter, 3.2mm thick. It has a nominal voltage output of 3V (although it starts a little high at 3.2V and slowly drifts down to 2.5V as...
In Stock
[Buy Now](https://www.adafruit.com/product/654)
[Related Guides to the Product](https://learn.adafruit.com/products/654/guides)
### Part: M2.5x6mm Screws
quantity: 4
M2.5x6mm Screws
### Part: 10Ω Resistor
quantity: 2
10Ω Resistor
### Part: Elastic Rubber Band
quantity: 2
Elastic Rubber Band
- [Next Page](https://learn.adafruit.com/ultrahand/3d-printing.md)
## Featured Products
### nOOds - Flexible LED Filament - 3V 300mm long - Lime Green
[nOOds - Flexible LED Filament - 3V 300mm long - Lime Green](https://www.adafruit.com/product/5507)
Our favorite food when hacking on code or electronics is a hot bowl of noodles - and around NYC these are often called 'noods'! What we've got here are flexible LED noodles, in different lengths and colors. All are not good for eatin' but they _are _good for...
In Stock
[Buy Now](https://www.adafruit.com/product/5507)
[Related Guides to the Product](https://learn.adafruit.com/products/5507/guides)
### Single CR2032 / 20mm Coin Cell Battery Holder with Switch
[Single CR2032 / 20mm Coin Cell Battery Holder with Switch](https://www.adafruit.com/product/4856)
This tiny coin cell battery holder is ideal for small portable or wearable projects. It holds one 20mm coin cell (also known as CR2032) in series to generate 3V nominal. 20mm coin cells are popular as they are used in keychain lights and remotes, so they are easy to get and fairly...
In Stock
[Buy Now](https://www.adafruit.com/product/4856)
[Related Guides to the Product](https://learn.adafruit.com/products/4856/guides)
### JST PH 2-Pin Cable - Female Connector 100mm
[JST PH 2-Pin Cable - Female Connector 100mm](https://www.adafruit.com/product/261)
Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly chargers!
[We have the socket 'mating' version of this cable](https://www.adafruit.com/product/3814) over here,
In Stock
[Buy Now](https://www.adafruit.com/product/261)
[Related Guides to the Product](https://learn.adafruit.com/products/261/guides)
### JST PH 2-Pin Cable – Male Header 200mm
[JST PH 2-Pin Cable – Male Header 200mm](https://www.adafruit.com/product/3814)
For a really long time we assumed that the JST PH didn't have a free-hanging male header version. But then we found this **JST-PH 2-pin Male Cable,** and we were like, _this is perfect!_ It's not a genuine JST connector, but it's 100%...
In Stock
[Buy Now](https://www.adafruit.com/product/3814)
[Related Guides to the Product](https://learn.adafruit.com/products/3814/guides)
### 9V battery holder with switch & 5.5mm/2.1mm plug
[9V battery holder with switch & 5.5mm/2.1mm plug](https://www.adafruit.com/product/67)
This is a 9V battery pack with on/off switch and a pre-attached 5.5mm/2.1mm center-positive barrel plug. Use this to battery-power your Arduino (or other electronic projects) - it's ready to go out of the box!
Battery & screw not included.
![]()
In Stock
[Buy Now](https://www.adafruit.com/product/67)
[Related Guides to the Product](https://learn.adafruit.com/products/67/guides)
### Alkaline 9V Battery
[Alkaline 9V Battery](https://www.adafruit.com/product/1321)
Battery power for your portable project! These batteries are high quality at a good price and work fantastic with any of the kits or projects in the shop that use 9V.
These batteries are Alkaline (MnO2) chemistry, with a voltage range of 9.6V (fresh) to 4.8V (dead). The mAh capacity...
Out of Stock
[Buy Now](https://www.adafruit.com/product/1321)
[Related Guides to the Product](https://learn.adafruit.com/products/1321/guides)
### CR2032 Lithium Coin Cell Battery
[CR2032 Lithium Coin Cell Battery](https://www.adafruit.com/product/654)
A perfect match for our [sew-able coin cell holder](http://www.adafruit.com/products/653). This non-rechargeable coin cell is CR2032 sized: 20mm diameter, 3.2mm thick. It has a nominal voltage output of 3V (although it starts a little high at 3.2V and slowly drifts down to 2.5V as...
In Stock
[Buy Now](https://www.adafruit.com/product/654)
[Related Guides to the Product](https://learn.adafruit.com/products/654/guides)
## Related Guides
- [Adafruit nOOds Überguide](https://learn.adafruit.com/noods-uberguide.md)
- [DIY Quiz Show Controller System](https://learn.adafruit.com/quiz-show-controller-keyboard-bluetooth.md)
- [Unicorn Hat with Moving Ears](https://learn.adafruit.com/unicorn-hat-with-moving-ears.md)
- [FLORA + FONA](https://learn.adafruit.com/flora-plus-fona.md)
- [Firewalker LED Sneakers](https://learn.adafruit.com/firewalker-led-sneakers.md)
- [Mac Classic Fruit Jam](https://learn.adafruit.com/mac-classic-fruit-jam.md)
- [Adafruit NeoPixel Driver BFF](https://learn.adafruit.com/adafruit-neopixel-driver-bff.md)
- [DIY IoT Doorbell Camera with MEMENTO](https://learn.adafruit.com/diy-iot-doorbell-camera-with-memento.md)
- [CLUE case](https://learn.adafruit.com/clue-case.md)
- [PS4 Gamepad Display Mount](https://learn.adafruit.com/ps4-gamepad-display-mount.md)
- [DIY Wearable Pi with Near-Eye Video Glasses](https://learn.adafruit.com/diy-wearable-pi-near-eye-kopin-video-glasses.md)
- [Sketch Drawing Toy with CircuitPython](https://learn.adafruit.com/sketch-drawing-toy.md)
- [AI 3D Printed Figure](https://learn.adafruit.com/ai-figure.md)
- [10" Raspberry Pi Desktop](https://learn.adafruit.com/10-raspberry-pi-desktop.md)
- [Adafruit MCP4728 I2C Quad DAC](https://learn.adafruit.com/adafruit-mcp4728-i2c-quad-dac.md)
- [EL Wire Stocking](https://learn.adafruit.com/el-wire-stocking.md)