Wizzy: A Needle Felted Cat
Transform a handful of electronics into a fun, fuzzy, and fabulous needle felted animal.
Vibro-bugz
Use 3D printing, a motor, battery, and some googly eyes to teach basic maker skills.
Sandblaster - 3D printed sand buggy
Sandblaster is a variation on Blue Buggy remixing the original Cox International gas-powered sand buggy - scaled-down, converted to electric, and 3D printable!
You can use it to explore obstacle avoidance, autonomous navigation, driverless vehicle design, or assisted Remote Control. Or… build in the morning and race in the afternoon!
Qi Wireless Recharging Battery Case
Thinking about using a battery case for your phone, but don't want to give-up wireless charging? Have no fear, Qi is here! Now you can have a 'battery storage' case that can recharge itself without need of wires.
Servo Animatronic Tail
Add a touch of awesome to your interactive displays, costumes, or art projects with an animatronic tail comprised of 3D printed parts, a silicon tube, a servo, and minimal hardware.
Personal Torch 3000
3D printing, PCB production, datasheets, surface mount components... all in a super easy project for your next hack-night.
3D Printed Glow-Spike Bracelet
Come get your feet wet in wearables by combining a little 3D printing, a little soldering, some glue, and a few inexpensive parts!
Free-Wired 3x3x3 NeoPixel Cube
Time to make your own LED cube... without shift registers or limitations of a single color. That's right, three dimensions, easy setup, and all the color!
Making Adabot: Part 2
Ready to add electronics to the body and breath a little life into your Adabot?
Learning with LEDs
Use this simple and inexpensive kit to introduce electronics into your curriculum.
Trinket Powered Rover
Here's a low-cost and ultra fun rover to make yourself or use as a teaching aid.
LED Trinket Tree Topper
Create a custom heirloom tree topper with NeoPixel Rings and a Trinket.
3D Printed Animatronic Robot Head
Transform a pair of desktop speakers, two servos, and a handful of 3D printed parts into a fully functional animatronic robot head.
Modifying Servos for Continuous Rotation
Did you know you can make tiny gear-motors from inexpensive servos with no drift, variable speed, and no custom software settings to drive them?
3D Printed LED Goggles
Make it easy for your friends to find you in a crowd with some blinky awesome scratch-built headgear. PLA plastic from your 3D printer is a fine match for NeoPixel Rings.