Create a simple wireless charging stand for mobile devices with our Qi charger/transmitter, and Qi receiver modules

An overview on how to use 3D printers with dual extruders.

3D Print an enclosure for a 2.2" PiTFT HAT and Raspberry Pi Model A+

Build a 10" all in one Raspberry Pi Desktop!

The 20-sided die — or “d20” as it’s known to tabletop gamers — is an icon of geek culture. We’ll 3D-print a jumbo d20 and outfit it with electronics to announce your rolls (and a few surprises).

In this project we’ll show you how to use glow in the dark ninjaflex and conductive filament to create an LED wearable! No soldering or wires involved here, the circuit is fully 3D printed

Sew this flexible costume element onto a hat, hoodie, or headband and add NeoPixels or use glow in the dark NinjaFlex for illumination.

Dual extrusion 3d printing using PLA and conductive filament!

3D print a lovely electronics inspired chess set from metallic filament. Each piece is inspired by Circuit Playground, and has a lovely metal sheen. We even designed a 3D-printed snap-together chess board.

Make a HDMI portable display for a computer, camera or a raspberry pi! This portable, battery powered monitor contains an 800x480 7" display in a sleek 3D printed enclosure

Build a portable Raspberry Pi with a 5" display.

Take your Pi on the go with an adorable handheld "palmtop" computer. This battery powered Raspberry Pi has a 3.5" TFT display, mini speaker, and keyboard with trackpad. 3 USB ports are available for more accessories.

Build an epic 3D Printed shield!

Build a DIY gameboy pocket using Raspberry Pi A+ and 2.4" PiTFT

Here’s how to build a wireless charger for the Apple Watch.