Create the Starlight Groove Tutu, a beginner-friendly, sound-reactive LED skirt that sparkles and pulses to music using colorful star pixels—perfect for festivals, performances, or kids’ costumes.

Add NeoPixel lights and a force-sensitive resistor to a pair of animal slippers and make them light up when you step! Customize colors and animations in CircuitPython.

Bend it! Fold it! Twist it! Sing to it! Control it with your SmartPhone or any web browser. Take control of your lightscape with Sparkle Motion and WLED.

Add pebble pixel LED lights to a tree branch. Power them with a Sparkle Motion controller and WLED, and give your wall a nature based sound-reactive animated glow. This is a great beginner project with no soldering or coding required!

Adafruit n00ds are flexible, bendable noodles of light that work just like LEDs. Learn to choose them, connect them, and sequence them.

Professor Bubbleton’s Breathing Head responds to the curious with a faint, unsettling breath when the vessel is disturbed. Neither living nor entirely still, it blurs the line between scientific marvel and sideshow horror.

Make a pendant from an 8x8 LED matrix and a Feather ESP32 V2. This necklace has a compact design and onboard battery charging, and runs WLED -- no coding required.

Add NeoPixel LEDs to a piece of acrylic plastic and make your drawings or signs animate and glow. Wipe it clean and reuse it as many times as you like. No soldering or coding required!

Set up a big red button that controls your lights. Turn them on or off, change colors or effects, or turn on Party Mode with one click. Make your project interactive and fun for the whole family.

Create a laser-cut layered LED art panel with WLED using stacked wooden layers and edge-lit acrylic to produce clean, multi-depth lighting effects. This technique lets you run independent WLED segments on separate acrylic layers, turning any laser-cut design into a customizable, glowing light sculpture.

This is a fun beginner project that's so much fun to do with kids. Create sculpted mushroom lights with addressable, twisted wire "fairy" pixels, hot glue, and a Mini Sparkle Motion board and create fun animations on your smartphone.

Install WLED on the Matrix Portal S3 and connect it to an LED matrix for high resolution 2D graphics. Add a diffusion layer and a laser-cut design to make a gorgeous and unique piece of art.

Create a stack of acrylic laser-cut shapes and add the illusion of motion by running animated lights across the edge. Use the onboard microphone in the Mini Sparkle Motion to make the lights dance to your music.

Control the fans your inflatable props with a Circuit Playground Express. Set timers to turn the fans on and off, making your inflatable creatures dance around your yard! The magic is in the relays.

Make a magic mirror that delivers a message to anyone who approaches. Use WLED and the Sparkle Motion board and a PIR motion sensor together with edge-lit, laser etched acrylic to make magic messages appear.