Get up and running (tapping, free-falling, whatever!) in no time with this quality 3-axis, +/-16g digital accelerometer. from Analog Devices. It has more than one trick up it's sleeve too, with internal tap, double tap, motion detection, and more! Details in the guide.

Use 3D printing, a servo motor & CircuitPython to create a photography turntable. Spinning your subject will give your photos and videos extra flair.

Using a Feather M0 Express running CircuitPython, the NeoPixel strip's RGB values are affected by 3 potentiometers and displayed on an LCD.

A Trinket-powered NeoPixel RGBW ring light with adjustable brightness all inside a 3D printed enclosure.

Create a whimsical snow globe with a Circuit Playground Express and MakeCode that plays music and lights up every time you shake it.

The DRV2605L is a tiny motor controller that is specifically designed for vibration-disc and other haptic feedback motors. Using I2C you can string multiple built-in vibration effects for high quality tactile feedback.

This TFT display is big (2.8" diagonal) bright (4 white-LED backlight) and colorful (18-bit 262,000 different shades)! 240x320 pixels with individual pixel control. It has way more resolution than a black and white 128x64 display. As a bonus, this display has a resistive or capacitive touchscreen attached to it already, so you can detect finger presses anywhere on the screen.

ADS1115 16-bit 4-channel breakout and ADS1015 12-bit 4-channel breakout boards

LCDs are a fun and easy way to have your microcontroller project talk back to you. We wanted to make a 'backpack' (add-on circuit) that would reduce the number of pins without a lot of expense. By using simple i2c and SPI input/output expanders we have reduced the number of pins (only 2 pins are needed for i2c) while still making it easy to interface with the LCD.