A DIY step counter using the CLUE board programmed with CircuitPython. An optional 3D printed case and band help hold it to your wrist.

Build a CircuitPython powered MIDI controller! 3D print the parts to build a guitar that features strumming and a whammy bar!

Build a wireless 8-bit synth powered by the Feather nRF52840 and Circuit Playground Bluefruit. BLE communication allows the Feather to send packets with each button press. The Circuit Playground Bluefruit then plays the tones and swirls some NeoPixels after receiving the packets.

3D Print and build your own retro inspired weather station with PyPortal Titano and Circuit Python.

Mix traditional DIY and CircuitPython with this beginner woodworking project. NeoPixels are mounted inside this wooden Christmas tree shape and then controlled with a Circuit Playground Bluefruit that sits on top of the tree in a 3D printed star.

3D print and build your own motorized camera slider with Adafruit Feather and CircuitPython. Professional looking photography is a snap.

Create a creepy photo display that changes images based on the amount of light in a room.

The Raspberry Pi is an amazing single board computer - and one of the best parts is that GPIO connector! 40 pins of digital goodness you can twiddle to control LEDs, sensors, buttons, radios, displays - just about any device you can imagine. This Adafruit GPIO Expander Bonnet will give you even more digital deliciousness - 16 more digital input/output pins are yours for any desire you have.

Get up and running (tapping, free-falling, whatever!) in no time with this quality 3-axis, +/-16g digital accelerometer. from Analog Devices. It has more than one trick up it's sleeve too, with internal tap, double tap, motion detection, and more! Details in the guide.

Use 3D printing, a servo motor & CircuitPython to create a photography turntable. Spinning your subject will give your photos and videos extra flair.

Using a Feather M0 Express running CircuitPython, the NeoPixel strip's RGB values are affected by 3 potentiometers and displayed on an LCD.

A Trinket-powered NeoPixel RGBW ring light with adjustable brightness all inside a 3D printed enclosure.

Create a whimsical snow globe with a Circuit Playground Express and MakeCode that plays music and lights up every time you shake it.

The DRV2605L is a tiny motor controller that is specifically designed for vibration-disc and other haptic feedback motors. Using I2C you can string multiple built-in vibration effects for high quality tactile feedback.

This TFT display is big (2.8" diagonal) bright (4 white-LED backlight) and colorful (18-bit 262,000 different shades)! 240x320 pixels with individual pixel control. It has way more resolution than a black and white 128x64 display. As a bonus, this display has a resistive or capacitive touchscreen attached to it already, so you can detect finger presses anywhere on the screen.