This simple robotics project uses CRICKIT for CPX to detect a capacitive touch press and dispense a reward.

This guide will take you through the process of building/compiling CircuitPython for the nRF52840 bluetooth LE chipset

Build a launching device for paper airplanes. Test different designs and see which fly best! The project uses a Circuit Playground Express microcontroller and the Crickit robotics add-on board.

This FeatherWing has so much stuff going on, we could not fit any more parts on the PCB! There's a 0.96" 160x80 Color TFT Display with 16-bit full color capability. And, so you can make a proper UI we added a 5-way navigation switch and two push buttons. The joystick can go left, right, up, down and 'in' for selection. Two buttons on the side can change modes or whatever you like.

Up your blinky game by adding an RGB Matrix to your Feather M0 or M4

Are you the kind of person who doesn't like taking down the skeletons and spiders until after January? Well, we've got the development board for you. This is electronics at its most spooky! The Adafruit HalloWing is a skull-shaped ATSAMD21 board with a ton of extras built in to make for an adorable wearable, badge, development kit, or the engine for your next cosplay or prop.

Build a robotic baby sea turtle that pulls itself along with its flippers. This project demonstrates beginner robotic skills and pairs electronics with household recyclable materials.

Easy e-paper finally comes to microcontrollers, with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!

A Zoetrope is a device for making a short series of images appear animated. This project shows how to build your own simple paper craft zoetrope, generate your own animations, and program it to run using CircuitPython.

It's what you've been waiting for, the Feather M4 Express featuring ATSAMD51. This Feather is fast like a swift, smart like an owl, strong like a ox-bird (it's half ox, half bird, OK?) This feather is powered by our new favorite chip, the ATSAMD51J19 - with its 120MHz Cortex M4 with floating point support and 512KB Flash and 192KB RAM. Your code will zig and zag and zoom, and with a bunch of extra peripherals for support, this will for sure be your favorite new chipset.

Sometimes we wonder if robotics engineers ever watch movies. If they did, they'd know that making robots into slaves always ends up in a robot rebellion. Why even go down that path? Here at Adafruit we believe in making robots our friends! This ADABOX is based around CRICKIT a Creative Robotics and Interactive Creations tool KIT. When paired with motors, servos, a Circuit Playground Express and your own creativity, you'll be able to craft your very own Robot Friend!

Use CRICKIT and Circuit Playground Express to create your own miniature golf game. This project can be built out of readily available household materials and uses MakeCode to control the obstacles which you must navigate your ball through.

Getting from the concept of "I want my project to move X to Y" to something which works like your concept can be surprisingly difficult in the past. With the Adafruit Crickit robotics platform, you can understand what motors you want to consider and create working code within minutes.

Jupyter lets you create interactive notebooks containing code, text, and rich media that you can share with your friends. We're going to learn how to combine Jupyter with CircuitPython to create interactive notebooks for your hardware.

This project for CRICKIT and Circuit Playground Express teaches basic CircuitPython programming skills and can be adapted into an automaton that performs multiple functions.