The case was modeled after Syd Mead's iconic Tyrell Corporation building from Blade Runner.
3D Printed Parts
Print the two STL files contained in the zip archive linked below (also available on Printables and Thingiverse). I printed at 0.15mm layer height using PLA with 20% infill.
Use support material for the rim inset at the bottom of the case file only (you can use blockers to avoid printing support up the center).
I also found it helpful to print corner anti-warping tabs as shown here to mitigate curling.
Customization
Should you want to modify the files in a CAD or NURBs package, the STEP files generated from the original Rhino/Grasshopper source are linked below.
Text editor powered by tinymce.
