Featured
Tweet-a-Watt is a DIY wireless power monitoring system. The project uses an 'off the shelf' power monitor called the Kill-a-Watt and adds wireless reporting. Each plug transmits the power usage at that outlet to a central computer receiver. The receiver can then log, graph and report...
No Longer Stocked
Featured
This is our most popular XBee wireless module: the series 1 802.15.4 protocol 1mW with wire antenna. Its good for point-to-point, multipoint and convertible to a mesh network point. We suggest this module for those starting out as it is the easiest to get going: if there are two XBees in the...
No Longer Stocked
Featured
This adapter board is designed to make adding wireless point-to-point or mesh networking easy. I looked at all the XBee adapter boards available and decided to design something better:Onboard 3.3V regulator to cleanly power your XBee, up to 250mALevel shifting circuitry...
No Longer Stocked
Featured
This pack contains parts to make an additional outlet for your Tweet-a-Watt setup. Included isXBee Series 1 moduleXBee adapter kitBag of parts including 10,000uF capacitor, 220uF capacitor, 2 1% 10K resistors, 2 1% 4.7K resistors, 5mm green LED, 6" rainbow...
No Longer Stocked