DIY Props

Make a fully 3d printed prop inspired by Star Wars: The Book of Boba Fett. This prop is inspired by Tusken Raiders chief staff. 

Each part is printed in a different colored filament, so they're ready to go right off the printer. 

3D Printed Parts

Each piece features threaded connectors so it's really easy to assemble and take it apart. They can be printed without any supports and don't need any screws or glue. 

CAD Assembly

All of the parts feature threaded connectors on the ends. Follow the photos and cad assembly to reference how the pieces fit together.

CAD Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below:

• handle.stl
• pipe-coupler.stl
• pipe-fins-bottom.stl
• pipe-fins-collar.stl
• pipe-fins-tip.stl
• pipe-fins-top.stl
• 4x pipe.stl
• pommel.stl

Slicing Parts

No supports are required. Slice with setting for PLA material. 

The parts were sliced using CURA using the slice settings below.

• PLA filament 220c extruder
• 0.2 layer height
• 10% gyroid infill
• 60mm/s print speed
• 60c heated bed

Build Volume

The parts require a 3D printer with a minimum build volume.

• 100mm (X) x 100mm (Y) x 225mm (Z)

Silver/Gray Parts

The following parts are printed in silver or gray colored filament.

• pipe-coupler.stl
• pipe-fins-collar.stl
• pipe-fins-bottom.stl
• pipe-fins-top.stl
• pipe-fins-tip.stl
• pommel.stl

Brown/Red Parts

The following parts are printed in red or brown colored filaments

• 4x pipe.stl
• handle.stl