CAD Assembly

All of the parts feature threaded connectors on the ends. Follow the photos and cad assembly to reference how the pieces fit together.

CAD Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below:

  • handle.stl
  • pipe-coupler.stl
  • pipe-fins-bottom.stl
  • pipe-fins-collar.stl
  • pipe-fins-tip.stl
  • pipe-fins-top.stl
  • 4x pipe.stl
  • pommel.stl
Make sure to print 4x copies of the pipe.stl to make the whole length of the staff.

Slicing Parts

No supports are required. Slice with setting for PLA material. 

The parts were sliced using CURA using the slice settings below.

  • PLA filament 220c extruder
  • 0.2 layer height
  • 10% gyroid infill
  • 60mm/s print speed
  • 60c heated bed

Build Volume

The parts require a 3D printer with a minimum build volume.

  • 100mm (X) x 100mm (Y) x 225mm (Z)

Silver/Gray Parts

The following parts are printed in silver or gray colored filament.

  • pipe-coupler.stl
  • pipe-fins-collar.stl
  • pipe-fins-bottom.stl
  • pipe-fins-top.stl
  • pipe-fins-tip.stl
  • pommel.stl

Brown/Red Parts

The following parts are printed in red or brown colored filaments

  • 4x pipe.stl
  • handle.stl

This guide was first published on Jan 19, 2022. It was last updated on 2022-01-19 11:22:46 -0500.

This page (3D Printing) was last updated on May 15, 2022.

Text editor powered by tinymce.