Guide Products

TTL camera module breakout with large lens
Featured
This camera module can be a pretty neat project addition. It was designed to be used in security systems and does two main things - it outputs NTSC video and can take snapshots of that video (in color) and transmit them over the TTL serial link. You can snap pictures at 640x480, 320x240 or...
$39.95 each
In Stock
Add to Cart
Angled shot of green, rectangular TTL camera breakout board.
Featured
This tiny little camera module can be a pretty neat project addition, it is just like our other JPEG cameras (same chipset/software), but much smaller and slimmer. It was designed to be used in security systems and does two main things - it...
No Longer Stocked
No Longer Stocked
Angled shot of a Adafruit METRO 328 Fully Assembled
Featured
We sure love the ATmega328 here at Adafruit, and we use them a lot for our own projects. The processor has plenty of GPIO, Analog inputs, hardware UART SPI and I2C, timers and PWM galore - just enough for most simple projects. When we need to go small, we use a
view other guides that use this product
Out of Stock
Out of Stock
Weatherproof camera with mounting bracket and ring of LEDs next to resistors
Featured
This weatherproof camera module is a classy upgrade to the basic camera module we already stock in the shop. The main differences is that this one comes in a nice metal case with a mounting hinge, a 1 meter long cable with the TTL & NTSC...
$54.95 each
In Stock
Add to Cart
Angled shot of blue, rectangle microSD breakout board.
Featured
Not just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of use.Onboard 5v->3v regulator provides 150mA for power-hungry cards3v level shifting means you can use this with ease on either 3v or 5v systemsUses a proper level...
view other guides that use this product
$7.50 each
In Stock
Add to Cart
Angled shot of half-size solderless breadboard with red and black power lines.
Featured
This is a cute, half-size breadboard with 400 tie points, good for small projects. It's 3.25" x 2.2" / 8.3cm x 5.5cm with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails off easily to make the breadboard as...
Out of Stock
Out of Stock
Hand removing/installing micro SD card from SD adapter
Featured
Add mega-storage in a jiffy using this 8 GB class 4 micro-SD card. It comes with a SD adapter so you can use it with any of our shields or adapters. Preformatted to FAT so it works out of the box with our projects. Tested and works great with our
Out of Stock
Out of Stock