TRON Hoodie

by Becky Stern

published October 23, 2013, last edited October 23, 2013

posted in EL Wire/Tape/Panel Wearables

Save Download

71

Beginner

Project guide

Stitch it up

Gather up your supplies on a clean, flat work surface.

Put the inverter pack in your hoodie’s pocket and poke a small hole on the inside for a wire to come through.

Plug in the EL wire and stitch it to the hoodie along the inside of the zipper with a whip stitch. This way you can adjust how much shows by adjusting your zipper.

Continue whip stitching the EL wire around the inside of the hood and back down the other side of the zipper. If you have extra EL wire at the end, just cut it off.

Page last edited October 22, 2013

Text editor powered by tinymce.

Search