Assembly

Save Subscribe

Using the Stacking M2.5 Hardware Kit and a STEMMA QT cable, assembling everything together can be done by hand. No soldering required.

Gather all the parts.

Use the screws to attach the hex standoffs to the Trinkey QT2040.

Flip over and mount the Trust M breakout on the hex standoffs.

Screw the hex nuts on to the hex standoffs to hold the Trust M breakout in place.

Use the STEMMA QT cable to connect the Trust M breakout to the Trinkey QT2040.

 Overview Sending TRNG 

This guide was first published on Dec 09, 2021. It was last updated on Dec 09, 2021.

This page (Assembly) was last updated on Dec 08, 2021.

Text editor powered by tinymce.