Purple poslished fingers holding a Adafruit GEMMA v2 - Miniature wearable electronic platform.
Featured
Deprecation Warning: The Gemma bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still carry the Gemma so that people can maintain some older projects, we no longer recommend it.
No Longer Stocked
Angled shot of board
Featured
Deprecation Warning: The Trinket bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still carry the Trinket so that people can maintain some older projects, we no longer recommend it.
$6.95 each
In Stock
Hand holding Adafruit TriHand holding small Adafruit Trinket - Mini Microcontrollerket board.
Featured
Deprecation Warning: The Trinket bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still carry the Trinket so that people can maintain some older projects, we no longer recommend it.
view other guides that use this product
Out of Stock
Adafruit Mini 8x8 LED matrix w/I2C Backpack- Red.
Featured
What's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an 8x8 matrix or a 4-digit 7-segment display. Matrices like these are...
$9.95 each
In Stock
Adafruit Mini 8x8 LED matrix w/I2C Backpack- Yellow.
Featured
What's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an 8x8 matrix or a 4-digit 7-segment display. Matrices like these are...
$9.95 each
In Stock
Adafruit Mini 8x8 LED matrix w/I2C Backpack- Yellow-Green.
Featured
What's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an 8x8 matrix or a 4-digit 7-segment display. Matrices like these are...
$9.95 each
In Stock
Adafruit Mini 8x8 LED matrix w/I2C Backpack- Blue.
Featured
What's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an 8x8 matrix or a 4-digit 7-segment display. Matrices like these are...
$11.95 each
In Stock
Adafruit Mini 8x8 LED matrix w/I2C Backpack- ULTRA Bright White.
Featured
What's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an 8x8 matrix or a 4-digit 7-segment display. Matrices like these are...
$13.50 each
In Stock
Angle Shot of Lithium Ion Polymer Battery 3.7v 150mAh with JST 2-PH connector
Featured
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 150mAh for a total of about 0.6 Wh. If you need a larger battery,
$5.95 each
In Stock
Top view of Adafruit Micro Lipo - USB LiIon/LiPoly charger - v1 above a 2-pin JST cable.
Featured
Oh so adorable, this is the tiniest little lipo charger, so handy you can keep it any project box! Its also easy to use. Simply plug in the gold plated contacts into any USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into the JST plug on the other end. There are...
view other guides that use this product
$5.95 each
In Stock
Front shot of JST-PH Battery Extension Cable.
Featured
By popular demand, we now have a handy extension cord for all of our JST PH-terminated battery packs (such as our LiIon/LiPoly and 3xAAA holders). One end has a JST-PH compatible socket, and the other end has a matching plug. Between the two, 500mm of color coded wire. Handy for wearable...
$1.95 each
In Stock
close up of ends of various small heat shink tubes
Featured
Heat shrink is the duct tape of electronics, it keeps your stuff all safe and kept together. Especially when wiring and soldering, use heat shrink to add mechanical strength to cables. We use this stuff all the time and having a zip-lock bag of all the possible sizes is super...
Out of Stock