Materials
We suggest using PLA material but your free to use ABS, PET or exotic composites like wood, metals and others. The parts are listed in the tablet below.
7seg-case-btm.stl |
text |
text |
7seg-case-top.stl |
text |
text |
ab-cap.stl |
text |
text |
ab-LED-holder.stl |
text |
text |
ab-heart-diff.stl |
text |
text |
ab-thumb-diff.stl |
text |
text |
Slice Settings
Depending on your 3D printers hardware, you'll need to use your prefered slice settings. The parts are oriented to print "as-is" and doesn't require any support materials (very minimal overhangs).
These are the slice settings we used on our Printrbot Play, sliced using Simplify3D
- 220C Extruder (on a non-heated bed)
- 20% Infill
- 2 shells/parameters
- 5 top and bottom layers
- 0.9 Extrusion multiplier
- 0.48 Extrusion width
Customize Design
The enclosure and emjoi cover parts are available to modify and download. Click below to download the source. Add your favorite emjoi!
Download STLs
All the 3D printed can be downloaded on our thingiverse post, linked below. If you make one, please post a photo of it via make button!