Trinket M0 dev board with SAMD21 chipset.
The Adafruit Trinket M0 may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATSAMD21, a little chip with a lot...
$8.95
In Stock
Pink polished fingers holding a Adafruit GEMMA M0 - Miniature wearable electronic platform.
The Adafruit Gemma M0 is a super small microcontroller board, with just enough built-in to create many simple projects. It may look small and cute: round, about the...
$9.95
In Stock
Hand holding Adafruit TriHand holding small Adafruit Trinket - Mini Microcontrollerket board.
Deprecation Warning: The Trinket bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still carry...
$6.95
In Stock
Hand holding small Adafruit Trinket - Mini Microcontroller
Deprecation Warning: The Trinket bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still carry...
$6.95
In Stock
Purple poslished fingers holding a Adafruit GEMMA v2 - Miniature wearable electronic platform.
Deprecation Warning: The Gemma bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still carry the...
$9.95
In Stock
Large Enclosed Piezo Element with two Wires
This large (30mm diameter) piezo element is nicely enclosed with mounting holes so you can attach easily. Piezo elements convert vibration to voltage or voltage to vibration. That...
$0.95
In Stock
Single LED sequin PCB attached to two alligator clips, glowing white
Sew a little sparkle into your wearable project with an Adafruit LED Sequin. These are the kid-sister to our popular Flora NeoPixel,...
$3.95
In Stock
Adafruit LiIon/LiPoly Backpack soldered onto a Pro Trinket, plugged into a solderless breadboard.
If you have an ItsyBitsy or Pro Trinket you probably know it's the perfect little size for a portable project. This LiPoly backpack makes it really easy to do! Instead of wiring 2...
$4.95
In Stock
Plastic cylinder with two wires sticking out
The "poor man's" accelerometer/motion sensor! These spring-vibration switches are high sensitivity non-directional vibration induced trigger switches....
$0.95
In Stock
Lithium Ion Polymer Battery 3.7v 100mAh with JST 2-PH connector
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
$5.95
In Stock
Fine tip curved tweezers
When soldering small surface-mount (SMD/SMT) components, one thing you'll need is a good pair of tweezers. These are a great pair of every-day tweezers. They're anti-static,...
$3.95
In Stock
Array of many colorful heatshrink tubes.
Heat shrink is the duct tape of electronics which I guess makes this heat shrink the colorful and exciting duct tape they sell at craft stores.  This heat shrink comes in six...
$4.95
In Stock
Silicone Cover Stranded-Core Wire - 30AWG in Various Colors laid out beside each other.
Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire...
Out of Stock
Breadboard-friendly SPDT Slide Switch
These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in nicely into a solderless breadboard. They're easy to switch...
$0.95
In Stock
Filament for 3D printers in various colors and types stacked together.
Having a 3D printer without filament is sort of like having a regular printer without paper or ink.  And while a lot of printers come with some filament there's a good chance...
Out of Stock