To start, take the two motors, four long screws, four nuts, and two black panels.

Screw the two black panels onto the motors.

Screw the two black panels onto the motors. The metal panels go on the side with the red and black wires coming out

Have the hex nuts on the metal panel side so they dont interfere with the wheel!

Take the two wheels, rubber treads, and 2x small screws found in the same bag as the wheels.

Put the rubber treads on the wheels. This is a lot of fun!

Fit the wheels onto the white knob on the motors, they will snap nicely onto the oval center.

Attach the wheels into place with the tiny screws