Use fishing line or string to tie a loop around your panda's arms.


Tie the other end to the tip of the servo hub. This will pull the arms back and forth in a flapping motion.

Use double sided tape to affix servo hub to piece of cardboard.


Press hub onto servo motor.

Cut a small square hole in the base of the box.


This will allow you to feed 5V power into the box.


Connect 5V power to your CRICKIT board.

This guide was first published on May 24, 2018. It was last updated on Apr 21, 2024.

This page (Making Connections) was last updated on Mar 08, 2024.

Text editor powered by tinymce.