Build Size

115.5mm x, 72.5mm y, 31.5mm z. The parts will fit on all of the open source 3D printers in the Adafruit shop. 


We recommend using PLA filament for minimal warping and best quality. We encourage the experimentation of other filaments like copperFill and SemiFlex for special applications. 

CURA Slicer Profiles

Our slicer settings for CURA are available to download and import. You can use these profiles as a starting point to dail in your machine.

This guide was first published on Jan 26, 2015. It was last updated on Jan 26, 2015.

This page (3D Printing) was last updated on Jan 19, 2015.

Text editor powered by tinymce.