Build your own Touch Deck and you'll have full-color, customizable USB controls at your fingertips. The Feather RP2040 + 3.5" TFT display running CircuitPython makes the ultimate, multi-layer DIY Stream Deck.

Parts and Materials

Angled shot of black rectangular microcontroller "Feather RP2040"
A new chip means a new Feather, and the Raspberry Pi RP2040 is no exception. When we saw this chip we thought "this chip is going to be awesome when we give it the Feather...
In Stock
You should be able to use Feather M4 and Feather nRF52840 boards with this project as well, but currently it's been tested only on the Feather RP2040.
Overhead shot of a Black woman's hands with a blue and pinkish-red manicure drawing a heart on a touchscreen breakout.
Spice up your Feather project with a beautiful 3.5" touchscreen display shield with built in microSD card socket. This TFT display is 3.5" diagonal with a bright 6 white-LED...
In Stock
USB Type A to Type C Cable - approx 1 meter / 3 ft long
As technology changes and adapts, so does Adafruit. This  USB Type A to Type C cable will help you with the transition to USB C, even if you're still...
In Stock


USB C to USB C cable. USB 3.1 gen 4 with E-Mark. 1 meter long
As technology changes and adapts, so does Adafruit! Rather than the regular USB A, this cable has USB C to USB C plugs!USB C is the latest...
In Stock

Other Parts

You'll need access to a 3D Printer + filament to print the Touch Deck case. For the case, you'll also need some fasteners and rubber feet.

Black Nylon Screw and Stand-off Set with M2.5 Threads, kit box
Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker...
In Stock

M2.5 x 16mm Screws

You'll need four longer screws for the top of the case. I used these socket head screws for that stylish look, but any style you like will work.

Pack of 4 Little Rubber Bumper Feet
Keep your electronics from going barefoot, give them little rubber feet! These small sticky bumpers are our favorite accessory for any electronic kit or device. They are sticky, but...
In Stock


Right Angle USB Type C Adapter - USB 3.1 Gen 4 Compatible
As technology changes and adapts, so does Adafruit, and speaking of adapting, this right angle adapter is USB C...
In Stock

This guide was first published on Mar 24, 2021. It was last updated on Jul 21, 2024.

This page (Overview) was last updated on Mar 08, 2024.

Text editor powered by tinymce.