Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below.

  • Bracket 1
  • Bracket 2
  • Battery Bracket

Slicing Parts

Slice with setting for PLA material. The parts were sliced using CURA using the slice settings below.

PLA filament
215c extruder
0.2 layer height
10% gyroid infill
60mm/s print speed
60c heated bed

Supports
4% density
.2 extrusion width

This guide was first published on Oct 14, 2020. It was last updated on Oct 14, 2020.

This page (3D Printing) was last updated on Nov 06, 2020.