3D Design Files

ABS or PLA

You can print the parts in either PLA or ABS. We recommend printing the TARDIS! body part in either white or transparent material. The body STL file is the part that will need to diffuse the LED sequins.

There are two sizes available!

CR1220

These parts are optimized to fit the CR1220 Coin Cell Breakout. It's about half the size of the CR2032.

cr1220-base.stl
cr1220-bottom.stl
cr1220-top.stl
cr1220-body.stl
cr1220-frame.stl
cr1220-sequin.stl

Temperature @ 230c
10% Infill
2 Shells
0.2 Layer Height
90/120 Speeds

CR2032

This bath was designed to fit the CR2032 Coin Cell Breakout. It's double the size of the CR1220 and has more details in the design.

cr2032-body.stl
cr2032-cover.stl
cr2032-frame.stl
cr2032-platform.stl
cr2032-sequins.stl
cr2032-top.stl

Temperature @ 230c
10% Infill
2 Shells
0.2 Layer Height
90/120 Speeds

Customize Design

The original solids are available to modify and download from our 123D Design project page. 

This guide was first published on Oct 28, 2014. It was last updated on Oct 28, 2014.
This page (3D Design Files) was last updated on Jun 18, 2020.