Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below.

Slice with settings for PLA material. 


The parts were sliced using CURA using the slice settings below.

  • PLA filament 220c extruder
  • 0.2 layer height
  • 10% gyroid infill
  • 60mm/s print speed
  • 60c heated bed

Filaments

The filamented used in this project.

This guide was first published on Feb 09, 2022. It was last updated on 2022-02-07 12:40:41 -0500.

This page (3D Printing) was last updated on May 24, 2022.

Text editor powered by tinymce.