The diagram below provides a general visual reference for wiring of the components once you get to the Assembly page. This diagram was created using the software package Fritzing.

Adafruit Library for Fritzing

Adafruit uses the Adafruit Fritzing parts library to create circuit diagrams for projects. You can download the library or just grab individual parts. Get the library and parts from GitHub - Adafruit Fritzing Parts.

Wired Connections

The PropMaker Feather RP2040 is powered by a 3.7v 1200mAh Lithium Ion Polymer Battery. Wires connecting various components:

• DIN from NeoPixel strip to NeoPixel Input on Feather
• 5V from NeoPixel strip to 5V on Feather
• GND on NeoPixel strip to GND on Feather
• STEMMA JST connector from Gamepad connects to STEMMA JST connector on Feather
• GND from Feather to Pin 1 on Slide Switch
• EN from Feather to Pin 2 on Slide Switch