Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below.

  • eggG-head.stl
  • eggG-body.stl
  • eggG-horn.stl
  • eggG-eye.stl
  • eggG-leg.stl
  • eggG-foot.stl

Slicing Parts

 

Supports are required. Slice with setting for PLA material. 

The parts were sliced using CURA using the slice settings below.

  • PLA filament 220c extruder
  • 0.2 layer height
  • 10% gyroid infill
  • 60mm/s print speed
  • 60c heated bed

Supports

 

  • Support Extrusion Width: .2
  • Support Density: 4%
  • Support Z Height: .21
  • Interface: On
  • Support Roof: On
  • Support Pattern: Zig Zag
  • Support Roof Pattern: Zig Zag

 

Build Plate Adhesion 

 

  • Type: Brim
  • Line Count: 6
  • Brim on inside + outside

This guide was first published on Apr 07, 2021. It was last updated on Apr 07, 2021.

This page (3D Printing) was last updated on Oct 15, 2021.

Text editor powered by tinymce.