Flashforge Creator PRO 3D printer
Featured
The Flashforge Creator Pro is the latest addition to FlashForge’s Creator family, built upon an open source platform.Based on proven design of the Creator X chassis, the Pro is now enclosed so you can print ABS better and more efficient than ever. The upgraded...
No Longer Stocked
Trinket wired up to two servo motor pan-tilt kit.
Featured
Deprecation Warning: The Pro Trinket bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still carry the Pro Trinket so that people can maintain some older projets, we no longer recommend it. Please...
view other guides that use this product
$9.95 each
In Stock
Angled shot of blue rectangular audio FX sound board.
Featured
Would you like to add audio/sound effects to your next project, without an Arduino+Shield? Or maybe you don't even know how to use microcontrollers, you just want to make a sound play whenever you press a button. What about something that has to be very small and portable? You are...
$14.95 each
In Stock
Angled shot of an Adafruit Mono 2.5W Class D Audio Amplifier assembled to a speaker and white breadboard.
Featured
This super small mono amplifier is surprisingly powerful - able to deliver up to 2.5 Watts into 4-8 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.0V-5.5VDC. Since the amp is a class D, its very efficient (over 90% efficient when driving an...
view other guides that use this product
$3.95 each
In Stock
Angled shot of blue, square-shaped accelerometer breakout.
Featured
So many accelerometers and so little time! We've expanded our accelerometer selection even more with this high-precision and inexpensive MMA8451 Triple-Axis Accelerometer w/ 14-bit ADC. You can detect motion, tilt and basic orientation with a digital accelerometer - and...
$7.95 each
In Stock
Angled Shot of the Adafruit LiIon/LiPoly Backpack Add-On for Pro Trinket/ItsyBitsy.
Featured
If you have an ItsyBitsy or Pro Trinket you probably know it's the perfect little size for a portable project. This LiPoly backpack makes it really easy to do! Instead of wiring 2 or 3 boards together to make a charging system, this little PCB sits on top of the PCB and allows a...
view other guides that use this product
$4.95 each
In Stock
Angle Shot of Lithium Ion Polymer Battery 3.7v 150mAh with JST 2-PH connector
Featured
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 150mAh for a total of about 0.6 Wh. If you need a larger battery,
$5.95 each
In Stock
Small, black, SPDT slide switch.
Featured
These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in nicely into a solderless breadboard. They're easy to switch no matter what size fingers you have, but not so easy that they'll get flipped by accident. Work great as...
$0.95 each
In Stock
Angled Shot of the Thin Plastic Speaker w/Wires - 8 ohm 0.25W
Featured
Listen up! This 1.5" diameter speaker cone is the perfect addition to any audio project where you need an 8Ω impedance and are using 0.25W of power. The speakers are rated at 0.25W, with a maximum input of 0.5W (printed wattage on back of speaker may have either value).We...
$1.75 each
In Stock
Stranded-core wires in white, gray, black, blue, green, red, orange, and yellow.
Featured
Silicone-sheathing wire is super-flexible and soft, and it's also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness...
Out of Stock