These steps apply only to the talking computer prop. For the total conversion beam, you can go back.

Magnets for Melon Halves

8x magnets are used to join the top and bottom parts together. This allows the top to be removed to allow access to the circuit.

The two parts feature four 1/4in diameter cavities for fitting the magnets.

  • 8x Magnets 1/4in diameter - 1/8in thick

Glue Magnets

Use a drop of super glue to permanently secure the magnets to the top and bottom parts. 

Take note of the polarities of each magnet. Use a marker to label the north/south poles for reference.

Secured Magnets

Allow the glue to dry before joining the two parts together.

This guide was first published on Nov 09, 2021. It was last updated on 2021-11-09 20:43:12 -0500.

This page (Talking Computer Assembly) was last updated on Nov 22, 2021.

Text editor powered by tinymce.