Hardware for Feather

Use the following screws to secure the Feather to the PCB mount.

  • 12x M2.5 hex nuts
  • 6x M2.5 x 10mm

Install Amplifier Screws

Insert 2x M2.5 x 10mm long screws through the two holes in the PCB mount. Reference the photo for correct orientation. Fasten 2x M2.5 hex nuts onto the threads of the screws to secure them to the PCB mount.

Install Feather Screws

Install 4x M2.5 x 10mm screws through the mounting holes on the Feather PCB. Fasten 4x M2.5 hex nuts onto the threads of the screws to secure them to the Feather.

Secure Feather

Place the Feather on to the PCB mount with the screw threads fitting through the mounting holes. Fasten 4x M2.5 hex nuts onto the threads of the screws to secure the Feather to the PCB mount.

Secure Amplifier

Place the PAM8302 amplifier over the two remaining screw threads. Fasten 2x M2.5 hex nuts onto the threads of the screws to secure the PAM8302 to the PCB mount.

Installed PCBs

Double check the Feather and PAM8302 are properly secured to the PCB mount. 

This guide was first published on Nov 09, 2021. It was last updated on 2021-11-09 20:43:12 -0500.

This page (PCB Mount Assembly) was last updated on Nov 09, 2021.

Text editor powered by tinymce.