You can build your own synthesizer using the NeoTrellis M4 with the PJRC Audio System Design Tool and Audio library for Arduino! In this guide you'll learn how to patch together waveform oscillators, filters, envelopes, effects, and mixers. Then, you'll learn how to control notes and parameters with the Trellis M4's buttons and accelerometer.

Soon you'll be playing ripping synth leads, fat bass lines, and lush pads with a synthesizer of your own design!

So you've got a cool/witty name for your band, a Soundcloud account, a 3D-printed Daft Punk...
Out of Stock
These earbud headphones are the perfect accessory for your FONA - they've been tested to work with our modules - but can be used with any iOS or Android device that uses a TRRS...
In Stock
Always be ready rock out or record with this 5-watt Guitar Amplifier, Portable Recorder, and USB Audio Interface from Monoprice.This handheld 5-watt amp...
Out of Stock
This basic cable comes with two 3.5mm (1/8" headphone jack size) stereo connectors. It's fairly straight forward, you'll commonly need these to connect two audio devices...
In Stock
Add some extra boom to your audio project with these powered loudspeakers. We sampled half a dozen different models to find ones with a good frequency response, so you'll get...
In Stock

This guide was first published on Dec 18, 2018. It was last updated on Dec 18, 2018.

This page (Overview) was last updated on Dec 28, 2021.

Text editor powered by tinymce.