Overview
Persistence of Vision (POV) is a beautiful illusion created by moving a high-speed LED strip through the air, painting images in light through the motion of the strip. This project will show you how to build persistence of vision dance poi: light wands on strings that you can spin through the air to display geometric shapes, logos, or beautiful designs that seem to follow you as you dance.
The earlier version of this project was pretty code-intensive, and the poi were a little challenging to update. This guide gives the project a major upgrade: the new poi run CircuitPython on a Feather RFM69. That means adding new images is easy — just copy the image file into a folder on the Feather and it will appear on the poi. And this guide adds a battery monitor to the software so you know when it's time to recharge.
Using the Feather RFM69 also allows the poi to communicate with each other over RF, so they can stay in sync and display the same images together. We've also added a seriously cool feature: a handheld controller built with a TFT touchscreen and gamepad controller, and another Feather RFM69 board. From up to about 50 feet away, you can browse image thumbnails on the touchscreen and send a new image to all the poi with a tap of your finger.
This is a fairly advanced build with some tricky wiring, but we've provided all the code plus a library of sample images to get you started. You'll end up with a professional-quality performance prop that can display just about any image you can dream up.
Parts
You'll need one Feather, one cylindrical battery, one switch, one miniboost, two 100KΩ resistors, and 1/2 m of DotStar LEDs for each poi. And you'll need one Feather, one switch, a flat battery, a mini gamepad, and a TFT screen for the controller.
Build two poi for one dancer, or 4-8 poi to outfit your whole dance troupe. If you're using these in a professional performance setting, consider building an extra poi or two for backup.
If you're a hobbyist, you don't necessarily need to build the TFT controller box - the poi will work fine in standalone mode. But the controller really takes this project to the next level.
DotStar LEDs have a clock and data connection, making them ideal for POV effects. You'll need 1/2 m per poi, which is 36 pixels.
Use silicone stranded wire for all the connections. You'll want 4 different colors -- I used red, black, yellow, and green.
Use solid core wire as your antenna - you'll need about 3" (7.6 cm) for each poi and for the controller.
Get a cylindrical battery for each poi, and a 1200mAh battery to power the controller.
You'll need a few machine screws in size M2.5 and M3 to assemble the controller case.
Additional Materials
Poi Housing
- 1.1" interior diameter polycarbonate tubing - minimum 1 foot long for one 36 pixel poi
- End caps - I used these flow caps from Flowtoys.com
- Poi Leash & Handle: I used these from UltraPoi
- M6x25mm Chicago Screws for securing the handle to the poi
- 8" x 5/8" wooden dowel
- Holographic sticky-backed vinyl (optional, but.. SO SPARKLY)
Tools
- Soldering iron & accessories
- Drill and Rotary tool or saw for cutting tubing & dowels to length
- Hot glue gun
- Heat gun
- 3d Printer for printing the controller case (or you can use an online 3d printing service)
Page last edited October 07, 2026