NeoPixels

by Richard Albritton

Solder short wires to V+, G, and In on the NeoPixel Jewel.

Then connect the Jewel wires to V+, G, and Out on the NeoPixel ring.

Solder Pin 6 to the In pin of the NeoPixel ring.

leds_DSC00159.jpg

Then solder the 3V and GND wires to the ring as well.

leds_DSC00173.jpg
POWER ACCELEROMETER
This guide was first published on Jun 05, 2019. It was last updated on Jun 05, 2019. This page (NeoPixels) was last updated on Jun 05, 2019.